 |
Take a 20 litre artificial water cooler jug. bradawl four 3/8" holes about to the pinnacle, put in four 3/8" hoses a pair feet long and close them. These are your mouthpieces. Then locate a bowl. For the bowl on mine, I use one of those large flash plug sockets. Drill a hole in the lid of the bottle and put in the bowl. close it with silicone or amazing similarily heat-resistant. Then, on the bottom of the cap, afix a rubber hose over the bottom of the bowl and seal it in place. This is your main bowl w/hose. Now drill a 1" hole in the side of the pot right at the bottom, and put in some kind of plug or pipe with a detachable water-tight cap. Fill the bong half-full of water and put the lid on the top. You now have a bong with a 10 litre hall and a bowl that can hold as a great deal as an eighth of an ounce of ganja that four people can suck on at once. A propane torch or similar heavy-duty flame is optional for illumination the bowl, as the bowl is too big for a lighter flame. Once we're all satisfactorily not poisonous, I more often than not re-stuff the bowl and hold a flame to it while I uncap the hole near the bottom and plug the toke hoses. This drains all the water out, and as it drains, it serves as a cascade as well, fully filling up the 20-litre bottle (with the pipe & hose, the waterfall smoke is bubbled through the demanding water) with smoke. Any hoses that aren't being used to toke should be plugged (as well, cover the end with your thumb while exhaling or resting) or there won't be any suction. Or unplug a pair hoses and they'll serve as a carb to drain the hall. The final party bong.
|
